LZS plastic flow meter

Plastic flow meter LZB-S(long tube)

Tips:

1.There are three connection types: BSP thread type, socker-end type,and flange type.(This structure sketch takes socket-end connection type as example.)

2.Flowmeter is used for measuring the flow rate of liquid or air.

LZB-S Plastic flow meter(short tube)

(1)Before installation, take out foam supports in the tube carefully. Make sure the rubber ring is installed correctly on the indentation.
(2)This Flowmeter can be equipped with ABS pipe or PVC pipe by using special glue to connect. It also has flange or thread connection.
(3)This flowmeter should be installed vertically and be convenient to read the scale. When reading, keep the sight and the float horizontal.(General standard: the best flow to be measured should be 50%~70% of max flowrate. Try not use the maximum value.)
(4)The straight lengths of both inlet and outlet pipes connected with the flowmeter should be more than five times of the flowmeter’s length.
(5)The pressure of liquid should be stable. If the pressure of liquid is not stable, it will lead the wave of floater and cannot measure correctly, then a buffer or setting adjuster should be set above the flowmeter.